- A Little Update..emv Software Download
- A Little Update.emv Software Free
- A Little Update.emv Software Developer
- Emv Software X2 Free
PCI EMV Update – Unattended The deadline for merchants to bring payment devices into compliance with EMV standards passed more than three years ago, but there are still non-compliant devices in the marketplace. OtiKiosk provides kiosk system developers with an easy and affordable way to integrate a pre-certified EMV payment acceptance solution. Quick Chip is nothing more than a software update, although it’s an important one. It has been introduced by credit card companies as the next iteration of EMV technology. Visa offers this introduction video. For those that do have EMV terminals already, a software update helps to fix the speed issue, while those that do not have an EMV terminal may feel more inclined to make the switch now. However, some markets have more challenges and unique needs than others.
DUBLIN--(BUSINESS WIRE)--The 'EMV Technology Update: EMV Classic, Faster EMV, and Now QR Code EMV' report has been added to ResearchAndMarkets.com's offering.
Card networks and merchants have had an adversarial relationship over the past 10 years. This has obstructed the deployment of more secure and convenient payment technologies at the point of sale, including EMV 'smart cards', mobile wallets equipped with Near Field Communication (NFC) technology, and contactless cards.
For a week now I have been fighting the very bad flu going around. Starting to feel a little better now, but far from all OK:-(I have been testing loading and saving of levels on iPad and on my new Android tablet (Nexus 7) and the save / loading was taking a very very long time. Their terminal software –VARs can pre-certify their software solutions using 3rd parties to reduce the testing that the acquirer/processors need to do by up to 80% –Visa provides hands-on support to VARs who need technical information, education, consulting, and training. A dedicated team of experts are available to provide direct support.
Merchants have gone their own way on mobile wallets, preferring Quick Response (QR) Code-based mobile wallets to the NFC-based mobile wallets championed by the networks, banks, and mobile device manufacturers. Online retailers, for their part, complain that EMV has merely shifted fraud from the physical point of sale to the e-commerce site.
The research report goes into detail on how these technologies work, and what card issuers need to do to ensure that EMV QR codes meet a friendlier reception than other network-backed standards.
EMV got off to an extremely rough start in the United States. While the networks were able to improve the EMV experience by streamlining the process flow, a considerable amount of ill will built up, endangering the reception of a technology that normally merchants would welcome, since it greatly resembles the technology they themselves have adopted. Concentrating on the major pain point of e-commerce fraud would help give EMV QR Code the best chance of success, along with applicability in countries where the point-of-sale infrastructure is underdeveloped relative to the availability of mobile phones.
- A brief history of efforts to improve the security and customer experience at the point of sale
- Detailed process flows for EMV, 'quick' EMV, and consumer-presented and merchant-presented EMV QR Code
- Analysis of why NFC has not taken off in the United States and what might be done to change this
- Recommendations on how EMV QR could best be brought to market
Key Topics Covered
1. Executive Summary
3. How EMV Reduces Fraud
4. The Process Flow of an EMV Classic Transaction
5. Early Attempts to Speed Up EMV
6. The Faster EMV Transaction
7. Introducing the QR Code Acceptance Methods
- The Consumer-Presented QR Code Model
- The Merchant-Presented QR Code Model
- American Express
- Google (Android)
- Pulse Star
For more information about this report visit https://www.researchandmarkets.com/research/bqhxnf/emv_technology?w=4
EMV Update – Unattended
The deadline for merchants to bring payment devices into compliance with EMV standards passed more than three years ago, but there are still non-compliant devices in the marketplace.
A year ago, KioskIndustry.org published a piecelooking at the state of adoption of Europay, Mastercard and Visa (EMV) requirements among kiosk deployers in 2018. The bottom-line findings were that while kiosk manufacturers were stressing the need for EMV-compliant solutions for new projects, many deployers planned to keep current non-compliant solutions in the field until the end of their lifespan.
Now that a year has passed since that analysis, has anything changed? Where do things stand now?
EMV Compliance continues to expand
To recap, EMV is defined as “a payment method based upon a technical standard for smart payment cards and for payment terminals and automated teller machines that can accept them.” EMV “smart cards” store their data on integrated circuits in addition to the traditional magnetic stripes. According to financial services firm FirstData, EMV chip cards transmit a variable algorithm that changes with each transaction, making the data more secure than what’s found on magnetic stripe cards.
Under EMV standards, merchants had until Oct. 1, 2015, to make their payment processing equipment EMV-complaint. If a fraudulent transaction occurred at a merchant who had not upgraded their equipment, the merchant would eat the cost of that transaction along with any fines or fees that might be assessed.
And while EMV standards were relatively clear for in-person transactions, such as those at an attended checkout register at a grocery store, they were a bit murkier when it came to transactions at an unattended device, such as a self-service kiosk.
Although payment card issuer Visa doesn’t break out kiosk-specific statistics, it does track overall EMV adoption. By most measures, the process seems to be rolling along.
As of December 2018, more than 3.1 million merchants now accept chip cards, according to Visa statistics, compared with just 392,000 merchants as of September 2015. There are now 511 million chip cards in circulation compared with 159 million three years ago. Ninety-eight percent of payments accomplished at the end of 2018 were done using chip cards.
In addition, counterfeit fraud dollars dropped 48 percent over the 39-month period, according to Visa statistics, while that figure was closer to 80 percent for merchants who have completed the upgrade.
Still, that doesn’t mean credit-card fraud is going to disappear. According toresearch by intelligence firm Gemini Advisory, as of November 2018 chip-enabled cards represent 93 percent of the more than 60 million payment cards stolen in the past 12 months, thanks to the lack of U.S. merchant compliance with the EMV implementation.
Other Gemini findings include:
- 45.8 million or 75 percent are Card-Present (CP) records and were stolen at the point-of-sale devices, while only 25% were compromised in online breaches.
- 90% of the CP compromised U.S. payment cards were EMV enabled.
- The United States leads the rest of the world in the total amount of compromised EMV payment cards by a massive 37.3 million records.
- Financially motivated threat groups are still exploiting the lack of merchant EMV compliance.
In addition, a new type of card fraud is gaining in popularity. Unlike the skimmers fraudsters attached to gas pumps and other devices to capture credit card information (one of the types of fraud EMV was designed to eliminate) a “shimmer,” according to Krebs on Security, fits in the card slot between the chip on the card and the chip reader — recording the data on the chip as it is read by the underlying machine. The fact that the device fits in the slot itself instead of fitting over the card reader, it’s difficult to spot.
Here’s how Krebs described shimming in 2017:
“Data collected by shimmers cannot be used to fabricate a chip-based card, but it could be used to clone a magnetic stripe card. Although the data that is typically stored on a card’s magnetic stripe is replicated inside the chip on chip-enabled cards, the chip contains additional security components not found on a magnetic stripe.
“One of those is a component known as an integrated circuit card verification value or “iCVV” for short — also known as a “dynamic CVV.” The iCVV differs from the card verification value (CVV) stored on the physical magnetic stripe, and protects against the copying of magnetic-stripe data from the chip and using that data to create counterfeit magnetic stripe cards.”
The weakness a shimmer exploits lies with the card issuer as opposed to the payment device.
“The only way for this attack to be successful is if a [bank card] issuer neglects to check the CVV when authorizing a transaction,” ATM giant NCR Corp. wrote in a 2016 alert to customers. “All issuers MUST make these basic checks to prevent this category of fraud. Card Shimming is not a vulnerability with a chip card, nor with an ATM, and therefore it is not necessary to add protection mechanisms against this form of attack to the ATM.”
(If I needed any persuasion that payment card fraud was still a problem, I recently received a call from my bank alerting me that my debit card had been compromised. Someone had used what was obviously a cloned card to withdraw $300 at an ATM 30 miles away from where I live. The bank blocked the card when the fraudster attempted to make a withdrawal at another ATM. A few days later, my son’s debit card was compromised as well. In both cases, the money was refunded to our accounts and the dispute was closed in less than a week. When I posted a comment to the neighborhood Nextdoor social media site about the incident, dozens of people in my area said they had also been victims of payment card fraud. The speculation was that the issue occurred at a nearby convenience store, although nothing was proven.)
The current state of EMV affairs
By all appearances, EMV adoption among kiosk deployers essentially stands where it did a year ago. Deployers seem to be carrying on with existing equipment until the end of its lifespan, with any new deployments.
Part of the reason is likely, as mentioned in last year’s analysis, that the relatively low transaction averaged for many kiosks translates to less overall chargeback risk, which in turn means less incentive to upgrade. Given that risk, it doesn’t make much sense to invest in an upgrade it of the deployer plans to swap it out in a year or two.
“For kiosks we have seen very little in the way of EMV retrofits of fielded kiosks running in mag stripe even though there are surface mount devices well suited to field retrofits available,” said Rob Chilcoat, president, North American Operations with UCP Inc., a provider of EMV-compliant chip-and-pin hardware and payment gateway solutions for attended and unattended card payment terminals in North America.
In addition, some of the concerns about whether a kiosk would be considered attended, “semi-attended” or unattended under EMV requirements may have been overblown.
|The Path to EMV|
|What are some other risks in deploying non-EMV kiosks? Comments from the experts:|
“’Semi-attended’ doesn’t exist as far as the PCI Security Council and EMVCo are concerned; a device is either a Cardholder Activated Terminal (CAT) or it isn’t in their eyes,” Chilcoat said.
“This ‘semi-attended’ term was coined by processors to justify using less costly attended devices at self-checkout and other indoor self-service scenarios where the kiosks are being tended to by an employee of the store,” he said. “This PCI gray area still exists and we do see people ordering attended devices from us for this purpose. We advise against it, but we can’t stop them from doing what they want with a terminal. It really comes down to what the merchant’s processor will allow.”
Still, deployers shouldn’t be lulled into a false sense of security by thinking a low transaction amount means they’re insulated from major losses. Yes, if a fraudulent card is used on a small transaction at the kiosk, it can just be considered a cost of doing business. On the other hand, if someone is able to collect cardholder data at the kiosk and then sell it on the dark web causing massive fraudulent transactions elsewhere, and that gets tracked back to a non-EMV compliant kiosk, it won’t be trivial to a kiosk deployer.
But for new projects, EMV is definitely the norm.
“In terms of kiosks, the biggest thing that’s changed is the move from EMV being an optional form of payment to a requirement for our customers,” said Bruce Rasmussen, director of sales with payment technology provider Ingenico Group.
A Little Update..emv Software Download
“Currently we do not have any customers in the pre-deployment stage that are not already planning to support EMV now or in the next phase of their project,” Rasmussen said. “Additionally, merchants are continuing to redefine their customer interface to capture a new segment of the market, and payments continues to play a large role in this transformation.”
In particular, he said, there is a growing emphasis on supporting mobile wallets in payment solutions, which in turn drives demand for EMV contactless. With the majority of legacy cashless options only supporting magstripe transactions, merchants are putting updating their payment solutions to accept contactless at the top of their requirements.
“We see growth in contactless card payments and payments via smart phones driving growth in NFC adoption at the kiosk,” Rasmussen said. “The mandate from the card brands to support EMV contactless payments as of October 2019 is driving adoption for EMV since managing a contact and contactless certification may be the most economical and efficient use of resources to achieve a certification.”
Ultimately, although the process continues to be a gradual one, it’s only a matter of time before the vast majority of self-service kiosks in the marketplace are EMV-compliant.
A Little Update.emv Software Free
“In terms of new kiosks, we have not shipped anything mag stripe only for a long time,” Chilcoat said. “I think overall EMV migration has hit a tipping point where chip card payments is the expected user experience and kiosk companies are seeing that and including it in their RFP requirements.”
EMV Update Credits and Members:
A Little Update.emv Software Developer
EMV References and Article
Emv Software X2 Free
- EMV Coming To Kiosks in 2015
- Ingenico Q&A – Why So Long for EMV Adoption?